how to draw duct in 3d autocad 2020

View Original  10

To Describe a Duct Run

Products and versions covered

AutoCAD MEP 2020

By:

Assist

Using the Styles Browser Palette

Search and select a duct with a predefined arrangement, located in different drawings, folders and locations using the Styles Browser palette.

1. Habitation > Tools > Styles Browser > Object Type > HVAC Objects > Duct
2. Drawing Source: Cull from the drop-down listing
3. Cartoon File: Cull from the drop-down list
4. Search : Enter the name of the duct y'all are searching for
5. Select the duct from the gallery. Click to import it into the cartoon, and to start drawing with information technology.

Using the Properties Palette

1. Yous tin can as well direct add together a duct with a predefined system past selecting a duct from Home > Tools > Styles Browser > Object Type > Duct > Gallery
2. In the HVAC workspace, open the Properties palette in one of the following ways:
3. Add a clarification and specify a system.

   Click the icon to search, import () and add together () a new duct organization definition using the Styles Browser.

4. Select a routing preference, duct shape, and duct size.

   Click the icon to search, import () and add () a new duct routing preference using the Styles Browser.

   Apply the instant sizing tool:

Friction and velocity are read-simply and automatically refreshed when the flow rate changes.

5. To carve up the duct into smaller parts, select Yeah in the Specify Cut Length and enter a value for Cut Length.
6. Specify a coordinate system and value for Height:

   To…	then…
   draw a run at a defined superlative	select an elevation proper name for Pinnacle.
   describe a run at a specified summit relative to a wall or other duct or duct	enter the desired pinnacle, specify justify and offset. Use AutoCAD snaps or AutoCAD MEP toolset snaps to specify points on the wall, duct, or other objects.
   start a branch at a specified tiptop on a riser	enter the desired elevation and use AutoCAD MEP toolset snaps to specify a indicate on the riser.
   start a branch from a vertical run with a riser at a specified tiptop	enter the desired summit and use AutoCAD MEP toolset snaps to specify a betoken on the vertical run.
   extend a sloped duct or duct segment to a specified superlative	enter the desired elevation, Slope format, and a value for Slope. Then use AutoCAD MEP toolset snaps to specify the endpoint of a sloped duct or duct.

   If you lock the elevation of the duct and connect information technology to an object, the object's pinnacle is not inherited by the duct.

7. Specify the outset in either management:

   To specify…	select…
   the horizontal offset	Left, Center, or Right justification. Enter the horizontal distance of the run from the wall or other objects.
   the vertical first	Summit, Center, or Lesser justification. Enter the vertical distance of the run from the ceiling or other objects.

8. Select a routing method:

   To…	so…
   utilize the default bend method	elbow is default bend method. All bends are fatigued as elbows unless you specify differently.
   define your curve method in the Properties palette	select kickoff or transition-offset from the bend method drop-down. Click the Lock icon side by side to bend method your choice. All bends are drawn with the selected bend method.
   draw with multiple bend method	select the elbow, offset, or transition-offset curve methods from the drop-downwardly every bit you draw. If y'all practice not specify a bend method, and so the bend is drawn as an elbow.
   describe with a predefined bend angle	select a bend angle.
   define your ain curve angle in the drawing area	select User Defined, and specify a betoken for the curve angle. You tin can draw with or without the Compass.
   define your own curve angle in the Backdrop palette	enter a value for the bend angle.
   draw with merely the selected bend bending	click the Lock icon next to bend angle. The next segments you depict will have the aforementioned bend angle.

9. Specify a beginning bespeak, and proceed specifying points to add together more than segments to your run.

   Connection fittings are inserted to connect each segment every bit you draw.

10. Change the summit as needed, and continue specifying points to add more segments to your run.

    By default, a vertical segment is added when you lot change the elevation.

    Note: For more options when creating a duct, run across the duct advanced backdrop.

Post a question. Get an answer.

Become answers fast from product experts in the forums.

lightdousedise.blogspot.com

Source: https://knowledge.autodesk.com/support/autocad-mep/learn-explore/caas/CloudHelp/cloudhelp/2020/ENU/AutoCAD-MEP/files/GUID-1E076CAA-BE5F-40E4-ACB1-B2795B6C0B95-htm.html

Share this post